Accidents occurring due to brake issues have gone up over the years. A reliable report suggests that more than 20% of the accidents are caused due to brake-related issues, which is, obviously, quite a lot by any standards.
One of the important brake components is Brake Master Cylinder. It’s in charge of sending pressurized brake fluid to the desired car component, ultimately allowing the brake to create enough friction to slow down the vehicle.
What Are the Symptoms of a Failing Brake Master Cylinder?
The appearance of the brake light is one of the easily noticeable symptoms of this problem. A spongy pedal can also signal you that there is an issue with the Brake Master Cylinder. There are times when the brake pedal will sink deep. This is to say that it won’t return to its original position once you take the foot off the pedal.
This usually happens when the seal inside the Brake Cylinder fails to keep the fluid in it. Of course, you don’t need us to tell you how much of a safety hazard it is to drive with an issue of this sort. For those who have a damaged Brake Master Cylinder to deal with, here is the repair cost.
How Much Does Brake Master Cylinder Replacement Cost?
Depending on your car, the brake master cylinder replacement cost would sit anywhere between $250 to $700. As you can tell, there is a significant price gap. As such, the cost of labor won’t vary much. But then, the cost of parts will vary for different cars.
That said, you can also get away by paying less if it’s a fluid-related issue. This means that the mechanic will only flush out the old fluid and replace it with the new fluid. A fluid change job of this sort will cost somewhere between $75 to $110.
Can you Drive with a Faulty Brake Master Cylinder?
Like other industry experts, we would discourage you from driving with a malfunctioned brake master cylinder. Seriously, the last thing you would wish for is an accident occurring from a brake failure, especially when the issue could have been resolved by spending a few hundred dollars.
With a repaired brake master cylinder, you will get to enjoy a safe and comfortable ride throughout. So, try to address the issue immediately as opposed to delaying it for too long. Further delay can also affect other car components, leading to more expenses as well.
How To Save Money On Brake Master Cylinder Replacement?
Even if you know how to apply your mechanical skills very well, you should be careful about attempting a job of this nature because of the safety risks involved. If the fitting is not proper, the brakes can malfunction, posing a safety risk in the process.
Unless you are 100% sure that you can handle everything well, we do not suggest that you take a shot at Brake Master Cylinder replacement. If the shop allows you to bring your own parts, you can try saving money on the parts, though. You can also compare fees from different shops to get the job done at a reasonable price.
On the CarServiceLand, you can also find estimates of car repair or maintenance service costs: