Transmission Filter Change Cost

The transmission filter has a major role to play in a car’s wellbeing. If you are not aware, its job is to filter contaminations out of the transmission fluid. Issues with it can affect a lot of car components that depend on it. Therefore, you should know the signals of a failing transmission filter to undertake a timely repair.

What Are The Symptoms Of a Bad Transmission Fluid?

Here are some examples:

  • You will hear rattling noise coming from the car’s engine. It usually means that the filter is clogged with dirt and debris, causing it to make noise.
  • If there is a problem with the transmission filter, it could result in leakages too. Even when the transmission filter is not installed properly, a leakage issue can arise.
  • A burning smell is another noticeable issue linked with a failing transmission filter. If the filter gets blocked due to contaminations, it reaches a point where it emits a burning smell.
  • If you are finding it difficult to change gears, it could be an indication of a failed transmission filter. Sometimes, the gear can fail entirely out of the blue.
  • A bad transmission filter can also cause the transmission fluid to go bad. Therefore, it’s important that you check how clean the fluid is. Most car owners only check the fluid level and not the quality of the fluid.

How Much Does a Transmission Filter Change Cost?

You will end up spending anywhere between $200 to $400 for a car expense of this nature. The labor cost would be around $100 to $150. It depends on who is operating your car. The cost of the part will range from $25 to $225.

Auto CenterPrice
Your Mechanic
$150 -$360
Midas$190 -$400

Unarguably, other car repairs cost far more. So, it’s not that you are spending a ton of money on getting the transmission filter replaced. The waiting time won’t be too long either. Usually, the issue will be fixed within an hour.

How Does a Transmission Filter Change/Replacement Work?

Generally speaking, the car technician will change the transmission filter and the transmission fluid at the same time. This is because they tend to deteriorate at the same rate. Of course, the technician will first check for leaks before diving into the repair process.

If unaddressed leak issues go unnoticed during the repair process, the new parts fail to do their jobs efficiently. So, checking for leaks is usually the first step of the repair procedure. Depending on the car you own, the mechanic will take out the transmission oil pan to unscrew the transmission filter.

In some cases, a pan change might be required as well. The fluid is drained, and the necessary car components are replaced. By the end of the repair procedure, the car is tested outside to see whether or not the issue is resolved.

How Can You Save Money?

Just so that you know, car experts suggest that you change the transmission fluid in your car every 5000 miles. By following the required measures, you will enable the transmission filter to work up to its full capacity without any fuss. If the damage has already occurred, you can try saving money by replacing the transmission filter and fluid on your own. Believe us or not, you don’t need a mechanical degree to pull this feat off.

It’s a relatively simple repair procedure that can be carried out even by a naïve DIYer.

Finally, you can also shop around for the cheapest mechanic in your car. Frankly speaking, you will be able to save a decent chunk of money by exploring the market a bit. As described earlier, it’s not a too complicated procedure. So, you don’t have to hire an expensive mechanic for the job.

About the author

Check Also

How Much Does It Cost to Replace an Oxygen Sensor?

Your vehicle’s oxygen sensor is a critical component that ensures optimal engine performance and fuel …

How Much Does an Oil Leak Repair Cost?

An oil leak can be a major concern for any car owner, as it can …